Control & monitoring
 |
Tank level system - L55The system comprises a tank level controller with analogue level display which receives a continuous signal from a matching transducer. |
|
Tank level system - L58The L58 is a tank level and status display unit which can provide automatic level control when used in conjunction with a TLL50 continuous level sensor and a TLL70 single point level switch. |
 |
Hydrostatic liquid level sensor - T/LL200The Model T/LL200 series is designed for use in tanks requiring continuous llevel measurement of their contents and provides a voltage or 4-20mA output suitable for connecting into plc or process related applications. |
|
Coolant check management system - L70This system is designed to warn if the coolant level is below a specified minimum. A typical application is for a coach or bus to have the coolant level checked before entering service for the day. If the coolant level is too low then a red light illuminates and the vehicle cannot be started until the coolant is replenished. |
 |
Hydrostatic level management system - L100This system provides a continuous display of tank contents. Using a high quality pressure transducer, the level is displayed as a percentage on the controller. High and low level visual and audible alarms are incorporated. Max tank depth is 4M for diesel fuel. |
 |
Tank level controller - L110This controller displays tank contents in programmable units and also controls fuel delivery. Data relating to fuel deliveries can be downloaded via a USB port and an option allows for a GPRS module to transmit a theft or rapid loss alarm to a remote location via the internet or SMS. This controller is suitable for use with our T/LL200 hydrostatic level sensor. |
 |
Tank overfill protection probe - OP/01The Model OP/01 tank overfill prevention probe is designed for use in static bulk storage fuel tanks and operates by passing a signal back to the fuel delivery system when the fuel reaches the maximum filling level.
|
|
Tank overpressure relief valve - V/P seriesThe Model V/P series vent valves are fitted to sealed fuel tanks in order to relieve any pressure build up. |
Get in touch with us
Our friendly team of engineers are always happy to offer advice and find solutions to match your needs.
